Eight Types Of Bikes At Motorcycle Dealers

firThe first motorized bike was invented in 1867 and powered by steam. In 1894, the first mass-produced model was built. Since 1894, hundreds of millions of choppers, scooters, and off-road motorbikes have been produced and sold by motorcycle dealers throughout the world. In 2013, over 8,400,000 were registered in the United States. California, Florida, and Texas accounted for about a quarter of all registrations. They are very popular in dense cities and developing countries due to their low rates of fuel consumption and relatively inexpensive purchase price. Here are the eight main styles of bikes that you will find at motorcycle dealers.

Standard

Standard bikes are designed for basic street use. They generally do not have a windshield, and the driver sits in an upright position.

Cruisers

Cruisers are larger than most other motorbikes, and they offer a more reclined seating position. They have more torque, which allows beginner riders to not shift as much. Cruisers are popular with many motorcycle groups.

Dual-Sport

Dual-sport motorbikes are, as the name suggests, designed for both street and off-road use. Since they are driven off-road at times, a taller suspension is required, giving the rider a more upright seating position.

Sport

Sport bikes are designed for high levels of street performance. They are generally the fastest motorcycles on the road. They also offer the best braking and handling. As a result of the emphasis on performance, sport models generally offer lower fuel economy than their counterparts, and a less comfortable riding experience. Since they are designed with minimal air resistance in mind, riders sit leaning over the handlebars.

Touring

Touring models are built with the comfort of the rider in mind. They are used for longer distance trips, and often allow seating for a second rider. Most types have storage areas on the bike for luggage, and some even offer options such as radio and GPS navigation. Touring types can weigh well over 1,000 pounds when fully loaded.

Sport Touring

As the name suggests, sport touring bikes are a blend of the two models previously discussed. They are generally smaller and lighter than touring models, but larger and more comfortable than sport models. Due to their combination of comfort and sportiness, these models are one of the most popular.

Mopeds and Scooters

Scooters and mopeds are the lighter versions of the models discussed above. They have smaller engines, an upright seating position, and they often have an automatic transmission. As a result, they are very easy to drive. The small engine offers excellent gas mileage, as well. Worldwide, mopeds and scooters are the best-selling types of motorbike.

Off-Road

Off-road models are used exactly how the name suggests. They offer riders a more upright seating position and long suspension travel to deal with bumps and dips. The tires used are generally, specifically designed for their use on dirt, mud, and rocks.

In conclusion, motorcycle dealers offer potential riders a lot of options. If you are in the market for a new motorbike, use this list to help pick the model that is right for you.

Top Seven Movies Made Cooler by Motorcycles

motMotorcycles have appeared in hundreds of movies since the inception of the big screen. Some movie directors, however, used the genius tactic of shining a spotlight on these fine machines in their movies, instantly making these flicks much cooler than they would have been with a mere glimpse of the bike, or worse, no bike at all. Here are the top seven movies that were made that much cooler by their inclusion.

7. Wild Hogs

Even the comedic genius of the combination of Tim Allen, John Travolta, William H. Macy, and Martin Lawrence would not have been enough to save this movie without the constant presence of the actual “hogs.” These iconic bikes bring instant credibility to the screen while giving Allen, Travolta, and Macy at least a little street cred.

6. Robocop 2

Okay, Robocop by himself is already pretty cool. When you bring motorcycles into the mix, however, it is cinema gold. In the movie, Robocop mans a stray soft tail custom bike and chases down a box truck with it! Just like that an already cool movie got a lot cooler.

5. Rocky III

By this third installment of Rocky, the boxer (and the movie franchise itself) had started to lose his cool factor. Instead of being the tough, brash, unrefined fighter, Rocky was now rich, polished, married, and a dad. The only thing that could save Rocky in this current state is a motorcycle. Rocky rides the bike through Philadelphia and up to the statue that was erected in his honor, only to pelt the metal monument with his helmet in his anger and disillusionment at the loss of his trainer, Mick.

4. Animal House

This movie has a pretty high cool rating to begin with, but the injection of a motorcycle only adds to the cool factor. The scene that makes this movie is the character D-Day ripping up a flight of stairs on that beloved bike and ending his joyride by belting out a tune through his throat.

3. The Cannonball Run

What can be cooler than Burt Reynolds in a screwball comedy about a bunch of amateurs racing throughout the country? How about, as an added bonus, Peter Fonda riding a motorbike and mocking his own role as Easy Rider.

2. The Expendables

Generally action flicks are pretty cool, especially when they include the likes of Sly Stallone, Mickey Rourke, Jet Li, Dolph Lundgren, and Arnold Schwarzenegger. What makes this movie incredibly cool, however, is the scene where Rourke uses his chopper as a portable tattoo parlor and inks up Stallone right on it.

1. Indiana Jones and the Kingdom of the Crystal Skull

On its own this movie would not have much cool factor. While Harrison Ford has a large role, Shia LeBeouf has a larger one, and that fact hurts this movie. What helps the movie, though, is LeBeouf’s use of a motorcycle to rescue Ford and then ride through a library in an intense chase scene.

A Few Motorcycle Issues That You Need To Take Of

wIf you are a motorcycle owner then regular visits to a mechanic is inevitable. Since motorcycles are in motion through terrains that may or may not be suitable, wear and tear is almost certain. It is vital that you have sufficient knowledge of your vehicle and its parts so that you can enjoy rides on the motorcycle. Keeping a good watch and rectifying some common problems helps you extend the life of your vehicle. In order for you to keep a watch you must have the knowledge about the working and parts of the motorcycle.

There are a few issues that are common and you would need the help of an experienced individual to get them rectified. A few such problems are listed below.

Contamination of fuel

The motorbike can have starting problems or even sometimes refuse to start if you leave the bike unused for a long time with fuel in the tank. The fuel system is completely clogged by the stale gas. During winters when you have to retire the bike it is advisable to buy and add a solution that is designed to prevent the fuel from getting spoilt so that the gas remains good and clogging is prevented. If by chance you are not able to prevent the clogging then it is ideal to get the tank cleared by someone who knows the job at a repair center.

Old or punctured tires

Tires of new vehicles are usually low-grade causing them to wear out easily. It is better you upgrade the tires as soon as you purchase the bike. You need to get the tires replaced at least once in two years or as advised in the manual. A professional is in a better position to replace your punctured tire so it is better you rely on them and avoid doing it yourself.

Low chain lubrication

The rare tire of your motorcycle spins because the chain of the drive train is powered by energy from the motor. This is why you need to take good care of the chain. Riders can be exposed to serious situations when one misses to oil and maintain the chain in good condition. Greases are available in the market and you need to ask your mechanic which one is the best.

Being unclean

The bike is in continuous use and so there is a lot of dirt that accumulates both inside and outside. If not checked properly ant constant intervals then the grime deposits leading to bigger issues. These issues can easily be detected by regular checks so that dirty parts can be cleaned and problems kept out-of-the-way.

 

5 Great Tips For Selling Your Motorcycle Fast

koSo it’s time to put your faithful motorcycle up for sale? Of course you know what a great bike it has been for you all these years, but how do you assure your buyers that your motorcycle is the one for them?

There are some bases that you should be sure and cover before and during your sale. We have put together what we believe to be the top ones that you need to sell that bike fast.

    1. Know the expected value of your motorcycle. You may think your bike is the best one online and worth $5,000, but unless you price it competitively you will not even get people to show up at your door.

 

    1. Clean the bike. First impressions are everything, and if someone pulls up to your driveway and sees a filthy bike, the deal may have no chance before they even get out of the vehicle. Give it a good detailing.

 

    1. Tune up the bike. The second thing that will give the meeting a good or bad impression is how well your motorcycle runs. When they hit that start button, if it purrs to life and runs smoothly, it will be another positive check mark in the buyer’s eyes.

 

    1. Service records. Hopefully you have kept good service records and/or receipts to show any perspective buyers. This will help build confidence with your buyer.

 

  1. Take pictures from many angles. When taking photos for your ad, take from every angle you can possibly think of, including the gauges, seat, tire tread, engine closeup and more. You can never have too many pictures, but you most certainly can have too few pictures.

It’s never easy to sell your pride and joy, but taking these few steps will make your selling experience a much more pleasurable one and a much quicker one.

Which Is the Right Choice for You

wicWhen deciding between new or used motorcycles, how do you decide which is right for you? On the one hand, a new bike comes with fairly iron-clad guarantees of reliability. On the other, used motorcycles tend to require far less initial cash outlay. Which is the right choice? The answer depends on a few factors.

Price is a deciding factor for many riders. Once a new bike rolls off the lot, depreciation sets in, making a used vehicle a sensible choice, strictly in terms of impact upon the wallet. Simply stated, the price for last year’s model is likely to be far lower than the shiny new rides on the showroom floor. With a small sacrifice in terms of bells, whistles, and the latest technology, it may be possible to buy a higher quality bike than one could otherwise afford. It’s important, however, to weigh the total cost. Used motorcycles show the wear and tear of having been ridden. The bike that seems like such a great deal might, in fact, need a lot of work, or be due for major maintenance. If you are not an expert mechanic, it may be wise to buy from a dealer, who has a vested interest in ensuring that the bike is at least mechanically sound. They may hope to build trust with customers who will then return for maintenance, repairs, and accessories.

A rider’s personal mechanical ability comes into play when deciding between new and used motorcycles as well. Most riders are enthusiasts, and many have tinkered around with engines, at least to some extent. Not all riders, however, have the knowledge to spot a bike that has been laid down, causing a bent frame, or know the signs of a hog that has been ridden hard and poorly maintained. An honest assessment of your own ability, willingness, time, and resources is necessary when considering a pre-owned machine. Are you willing and able to perform repairs? Do you have the resources necessary to replace parts, carry out necessary repairs, and recognize signs of damage or wear?

Finally, it’s wise to consider the future. Buying used motorcycles through classified advertising or online sales sites is always risky, but a savvy buyer may choose to go in that direction if a particularly good deal presents itself. It may be prudent, however, to consider buying from a dealer, whether you decide upon new or pre-owned. You will have the assurance that the bike has at least been looked over and assessed for wear, tear, and the potential need for repairs. Most dealers offer more than just motorcycles. They’re an excellent resource over the long term, whether you need maintenance, repairs, accessories, or just advice. The riding culture is built upon relationships. Building a solid connection with a local dealer not only supports the community as a whole, it provides you with a valuable resource for help down the road. Whether you buy new or used, make sure to buy the ride that’s right for your needs.

Why All Riders Should Take Motorcycle Classes

3yThe idea of total freedom on the open road is appealing. You can enjoy feeling the wind in your hair with nothing but you, your bike, and the road. However, if you’ve never ridden a motorbike before, you will find that this idea may sound wonderful, but it is not as easy as you think. Traffic can be dangerous. Being around moving vehicles without the same protection can be more than just scary. All motorbike drivers, especially new operators, can benefit from some form of motorcycle classes.

Most Classes are Designed for Novice Riders

The design of the basic courses is for those who have little or no knowledge about operating a motorbike safely. They start with about five hours of in-class instruction and discussion. After that introduction to key principles, the instructor will take you out on a real bike exercise on a closed course. You will get anywhere from 10 to 15 hours of additional instruction on the vehicle. During this practice, you can expect to drive 10 to 15 miles and cover basics such as starting, slowing, stopping, accelerating, and shifting. You will also learn to anticipate and accommodate different traffic situations.

The primary focus of these courses is to get you ready to take the practical exam and receive your state license. However, there is an added benefit for some students. Some insurance companies will give you a discount for taking the class. That benefit could significantly lower your insurance rates.

Motorcycle Classes are Good Refreshers for Experienced Riders

There are times when even experienced drivers need a little instruction. Maybe you have been injured or had to sell your ride. You may have stopped riding due to bad weather. No matter what your reason is, going to professional motorcycle classes is a good idea.

You may feel that the basic course is too rudimentary for your needs. There may be different levels of courses, depending on the facility. You should be able to find an intermediate class that will offer you some instruction and techniques that will enhance your riding experience. It also serves as a refresher to help break bad habits you developed.

Improving the Reputation of Cyclists

The main goal of the Motorcycle Safety Foundation is “to make motorcycling safer and more enjoyable.” In order to do that, they want to ensure that all riders have access to quality education and training.

The sad fact is that in over half of all accidents involving a motorbike, the operator of the vehicle had less than six months of experience. Many members of the public believe that cyclists are reckless and have a general disregard for public safety. That perception can change if the operators would hold themselves to a higher standard and continue to educate themselves on proper safety habits.

Motorcycle classes are not intended to make getting your endorsement more difficult. If anything, the design is to teach you how to operate your vehicle safely. When it comes time to test for your state license, you should have no problem passing the exam.

Motorcycle Service Guide to Keep Your Bike Running For Years

bikYou enjoy riding through the streets on your motorbike. It is a true feeling of freedom to have the wind whipping around you. However, if you want to keep the bike on the road, motorcycle service is important. By doing basic maintenance, you can keep your cycle going indefinitely.

Breaking It In Properly

If you want to start maintaining your bike, you have to break it in right. The most crucial part of your cycle’s engine is how you handle the first few hundred miles. You need to treat the first couple thousand with care, as well.

Check with your owner’s manual to find out exactly what limits you should take. Each brand is slightly different, and some have a long list of restrictions, such as the type of oil to use for the first few hundred miles. The manual will indicate what other oil type, if any, you should use. Some machines require that you do not go past a certain RPM until after you hit a few thousand miles.

Read the Manual

Your original manufacturer’s manual is going to be the best place for maintenance information. The manufacturer knows what motorcycle service your vehicle needs more than you may. It is important for you to read and study it to ensure that you know what to do.

Additionally, you can buy a service manual. This book can cost anywhere from $40 to $100. However, it is worth the investment if you want to do some of the more sophisticated maintenance procedures yourself. This manual includes instruction on things like how to rebuild parts of your motorbike and includes hard-to-find torque values for each bolt on the vehicle.

Oil Changes

Routine oil changes can extend the life of your engine. It can help ensure that your engine maintains proper lubrication. If the oil is old and filled with dirt and debris, the oil cannot do its job as it is supposed to.

You should check with the manual in order to determine how often to change the oil. If you drive in a dusty or dirty environment, you probably should have it changed more frequently.

Bearings

Motorcycle service should include greasing your bearings. Those who ride a dirt bike learn this maintenance tip early, as new motorbikes need attention in the steering-head bearings and suspension linkages. Additionally, those who ride street bikes need to get into the habit of this maintenance. Even though sealed bearings are relatively maintenance free, suspension linkages need care on a regular schedule.

On occasion, these parts will need to be replaced. While greasing, you will get the opportunity to inspect the bearings. In addition to physical inspection of the bearings, being in tune with your bike and knowing when the front or back suspension is loose, you will know when to change the bearings.

Things You Need To Check Before Riding Your Dirt Bike

mikNowadays, individuals are more into motorcycles than cars due to numerous benefits such as lower fuel expenses and maintenance costs. Apart from that, individuals can also choose different types of motorcycles from sport bikes, mopeds, and even dirt bikes. If you wish to enjoy driving a motorcycle on different terrains, it is best to choose dirt bikes. But, before spending quality time riding under the open skies, it is important to check your bike. Below are the things you need to check.

Oil and coolant levels

Before doing anything on your bike, it is important to check the oil and coolant levels. These items are very important to ensure that your bike is running properly. Bikes with low oil can ruin the whole engine which can be costly. On the other hand, bikes that run on low coolant levels have higher risks of overheating.

Tyre thread and pressure

It is also important for individuals to check the tyre thread and pressure since it can affect its maneuverability, acceleration, and speed. Checking tyre thread is also important to ensure that you have good traction in any terrain to help you avoid slips and falls when doing tricks.

Brakes

Make sure that you also check the brakes. Brakes are essential to help you reduce speed when doing tricks or when riding. Malfunction of brakes may cause serious injuries. Therefore, check the brake fluid, determine if the brake pads are still adequate, and assess the brake hoses for any leaks.

Chain and sprockets

Chain and sprockets are the most neglected parts of a dirt bike. Unfortunately, these items play a huge role since they are used to move the power from the engine into the tyres. Worn out sprockets or loose chains can affect your bike’s performance.

Suspension

It is also vital to check the suspension of your bike before riding it since issues like leaks can alter its recoil and may affect the maneuverability in tight corners or steep slopes. Dead suspension can also make rides on rough terrain irritating and dangerous.

Rim spokes

Rim spokes are essential in keeping tyres straight. So, loose or broken spokes can spell disaster even during a simple trip. Hence, tighten up spokes by using the right tools and replace broken spokes to ensure that the tyres are leveled out.

Clutch adjustment and cable

Lastly, it is also important to check clutch adjustment and cable. This is important to allow individuals to accelerate and shift gears easily. However, make sure that the adjustment is right to avoid burning the clutch plates or snapping the cable.

With all these simple tips, individuals can enjoy a fun-filled day of cruising and doing tricks with their dirt bike.

5 Questions to Ask Yourself Before Buying a Bike

adEvery single person in this world will obviously love to own a motorbike. However not everyone can afford it. However once a person can afford it, he or she takes the next step to go forward and make that great purchase. There are some basic questions that you need to answer by yourself before making this important purchase. These questions have been briefly explained as follows.

1. Are you an experienced rider/biker?

It is obviously an undeniable fun of riding a motorbike. This process can also prove to be very lethal if not done properly. Thus even before you consider purchasing a bike, you must consider whether you are an experienced rider or not and on the basis of this answer you can select the type of bike you want to purchase.

2. What are your intentions while riding?

This means that you must take the kind of riding and your intentions into consideration. You must think whether you want to race or simply ride as you are passionate about it. In this case, various characteristics like the mechanical and performance attributes should be taken into consideration.

3. How much are you willing to spend?

This obviously depends on your budget and how passionate you are for spending that particular amount of money. There are various types of financing options that you can very well take into consideration before making a purchase.

4. Do you really need a brand new bike?

This is one of the most important questions that you must ask yourself. A motorcycle can be your primary option in one case and in another case it can be a secondary option. Thus you must give yourself a significant amount of time before you decide and make sure that you really want to make this purchase. It is one of the important things to remember.

5. Is this bike for you?

After go through the entire ordeal because of the numerous choices that are available, it is time that you answer the question of whether this bike is for you or not. For example, if you cannot put your legs on the ground, the bike is obviously not meant for your use. You must take your comfort into consideration over other characteristics which obviously should be secondary for you. Don’t look at a high performance bike if you don’t want to speed. This is only going to make things worse for you.

What Are the Benefits of Cargo Motorcycles

carThe three wheel cargo motorcycles are a versatile piece of equipment to simplify the process of making a wide range of deliveries. With a maximum speed of 25-80 kilometers per hour, these motorcycles have the ability to cover a lot of terrain while still traveling in the more compact and easy to maneuver vehicle. This type of vehicle is certain to benefit in busy urban areas where it is more different to find suitable parking spaces.

Here are several benefits of using the three wheel cargo motorcycles:

Accepts most cargo

This type of motorcycle is a versatile piece of equipment with the ability to accept a wide range of loads. Some of the most common loads include fruit, wood, metals, coal, water, fertilizer, and grain. The load capacity of these vehicles can easily reach 1200 kilograms or more. The rear cargo area can be outfitted in several different configurations to make sure it is most practical for the intended load.

Most of these vehicles have an open rear with a lifting mechanism for ease of unloading goods on arrival at the drop off point. However, for certain loads, such as food, it is possible to have a fully enclosed rear section. Other configurations for the rear of the motorcycle include a lifting platform or seats for taking passengers.

Ready to use

The design of these cargo vehicles makes them easy to handle for anyone who has experience with a motorized bike in the past. These motorcycles include the standard electric/kick starting system with 5 speed transmission, and fueled on gas or petrol. Most riders are up and ready to use this type of transport after only a short period of training.

They are cheaper

The three wheel cargo motorcycles are a lot less expensive to purchase than a full size delivery truck. Many of these motorcycles are priced at $600-$1650 to provide an inexpensive solution to haul cargo with great ease. In addition to the initial investments, the ongoing costs for repairs and maintenance are generally a fraction of keeping a truck on the road. Plus, storage is less of an issue because these vehicles are small in size and only measure about 10-5-ft in length by 4.5-ft in width.

Whether it is to transport goods or passengers, the three wheel cargo motorcycles provide a highly versatile mode of transport that is perfect to use for the lighter loads or when traveling on the most congested streets.