ATV, Dirt Bike Riding Tips and Techniques

evIt won’t be a surprise if someone thinks that the “A” in ATV stands for adventure. That could be an honest mistake considering that quads are mostly used for adrenaline-pumping rides. Unfortunately, owners who like to keep it fast and dirty are sometimes guilty of keeping the vehicle filthy for a long period of time. If you are one of those owners and you are wishing for a list of the least things that you can do to ensure that your ATV still runs, you are in luck because you can learn all about them here.

Clean the Air Filter

Whenever you take your quad on an extended spin on muddy or dusty terrain, you need to commit a few minutes of your time after the ride to clean the air filter. Your engine is bound to suck nasty elements like mud and debris if the air filter is dirty. When that happens, your quad’s engine could fail.

Cleaning the air filter is easy. All you need to do is to detach the air filter and give it a good wash using a filter cleaner. After that, blow-dry the filtering component and then apply filter oil before putting it back inside ATV. It is recommended that you also follow this procedure once a month.

Check Engine Oil

Quad engines are high revolution per minute machines that need synthetic oil for lubrication. Whenever shopping for quality synthetic oil, make sure that you buy the type recommended by the factory. The frequency of refill depends of how you use your vehicle.

Many ATV riders think it is enough to change oil once or twice per season, but if you are one of those owners who often take the quad to its limits, you need to change the oil a few more times. Regular oil drainage and replacement is necessary to keep your vehicle in excellent condition. Keep in mind that every time you change the vehicle’s oil, an oil filter change is also required.

If you have no idea how to replace oil, here are simple steps that you can follow:

  • Start the engine to warm the oil.
  • Once the oil is warm, turn off the engine and take off the drain plug. Be sure to wear gloves before touching the plug.
  • Drain the oil and remove the oil filter.
  • Apply fresh synthetic oil to a new oil filter’s seal.
  • Install the new oil filter and screw the drain plug back on.
  • Add fresh synthetic oil up to the recommended level

After following these instructions, fire the engine again and then keep an eye out for leaks. Give yourself a pat on the back for successfully changing your ATV’s oil.

Curb Condensation

As part of maintaining the quality of oil running inside your quad, you need to monitor condensation, especially if you are zipping through wet and muddy terrain. If your gear casing is hot and your front differential is splashed with cool water, you can expect condensation to occur. The moist condition can affect the quality of your ATV’s oil which could result to engine failure.

To avoid this situation from ever happening, check for the oil’s consistency. Insert an immaculate zip-tie into the plug hole. Milky oil means condensation took place and to prevent any damage to your quad, you have to follow the steps above to replace the adulterated oil.

Costly Mistakes That Could Ruin Your ATV

s3Your all terrain vehicle is not just a toy; it is an investment for either business or pleasure. However, a mistake could ruin your ATV, turning to liability. By investing a small amount of time knowing the costliest blunders you can commit to your ATV, you are protecting your investment big time.

Forgetting About the Air Filter

The air filter is essential in maintaining your engine’s efficiency. If the air filter is filled with dirt and grime, that’s bad news for your engine. From the component’s name, its job is to filter the air the engine needs to produce power and when it fails to do its one duty, your ATV’s engine might be up for serious repairs.

When the air filter is dirty for an extended period of time, the engine has no defense against dust and dirt. Over time, your ATV will show the symptoms of riding with a filthy air filter including reduction in performance and loss in horsepower. If you are not a lucky guy, your quad might need a new engine.

To avoid committing this blunder, commit to cleaning your air filter every time you go on a nasty ride. A few minutes and a few dollars will go a long way in keeping your engine in tiptop shape for years.

Submerging the Quad

Some people consider riding their ATV on terrain covered with mud and shallow water as the ultimate fun. They push their quads to the limit, measuring the number of inches of mud it takes to get the vehicle stuck. While the activity can be sight to see, you are putting your investment in a risky position.

Once your quad’s engine sucks water or mud, you are reducing the value of your investment by allowing moisture to mix with gasoline and oil. So do not be surprised if your ATV sputters in the heat of the moment; that’s just the quad telling you it is choking. However if the blunder has already been committed, the best thing that you can do is to tow the vehicle to the nearest shop. Fixing the ATV yourself is a bad move. Do not try to fix a mistake with another mistake.

Spoiling the Fuel

Does gasoline go bad? According to a report published by CNN, it does. Apparently, gas left inside your fuel tank will degrade if not used for a couple of months. This issue is not popular because car owners rarely leave their vehicles sitting inside the garage for a prolonged period of time. It’s a different story when it comes to quad owners.

Many owners are guilty of ditching their ATVs for a season and two only to expect it to perform like brand new days before summer. Bad fuel can cause your vehicle to poorly perform or not perform at all. Therefore if you live in an area where ATVs are not fun riding during the winter, you can mix fuel system stabilizers to your quad’s gas. Based on the same report, it can extend the freshness of the gas for up to 15 months.

Leaving the Radiator Clogged

ATV owners enjoy it when they take their vehicles on off-road adventures. While quads are built for that type of use, they are not designed to keep dirt and grime away forever. Different elements like sand, mud and debris can get inside your radiator and when that occurs, your engine will take the heat.

A filthy radiator can cause your engine to overheat, and it is something that you don’t want to happen when you are showing off your new ride to your friends. So whenever you ride through muddy or dusty terrain, make sure the radiator is also attended to.